Difference between revisions of "File:Fig1 PassiveSampling.jpg"
Debra Tabron (talk | contribs) (Figure 1. The Snap Sampler<sup>TM</sup> is an example of a passive grab sampler. The system consists of vials that can be installed singly or in series (top left) and then triggered from the ground surface (bottom left) when the sample is ready to be...) |
(No difference)
|
Latest revision as of 19:55, 24 June 2016
Figure 1. The Snap SamplerTM is an example of a passive grab sampler. The system consists of vials that can be installed singly or in series (top left) and then triggered from the ground surface (bottom left) when the sample is ready to be collected. The grab sample can then be sent for analysis with minimal preparation (right).
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 19:55, 24 June 2016 |  | 1,625 × 1,148 (1.53 MB) | Debra Tabron (talk | contribs) | Figure 1. The Snap Sampler<sup>TM</sup> is an example of a passive grab sampler. The system consists of vials that can be installed singly or in series (top left) and then triggered from the ground surface (bottom left) when the sample is ready to be... |
- You cannot overwrite this file.
File usage
The following page links to this file:
